Ask technical questions, discuss hifi, show pics of your gear: Join us on
|1||Low Noise Audio Power Supply 115/230V +/- 0 - 15V 100mA|
We only use a session cookie. This cookie stores your shopping basket while your are navigating on our pages. The moment you leave NewClassD.com, the session cookie is destroyed, and erased.
Low Noise Dual Audio Power Supply
2018 Version for line level Audio applications such as line amplifier, D/A converter, phono stage etc.
|Power Supply Modules|
|Test product for 30 days in your own system. Full money back warranty...|
Like 0 people like this.
Power is critical... Without a clean and neutral power supply, even the best audio circuit will not perform it's best. If a power supply has noise on it's regulated side, that noise will progress to the audio signal. If the power source for an analog circuit has frequency dependent load impedance, this will give the power supply an unwanted influence on the sound. What good is it to use expensive opamps, and decoupling capacitors in an analog stage, if the cheap and slow 7805 or LM317 regulator on the power rail, is singing along too?|
That's why we designed the Dual tracking supply / regulator. The Supply is with on board mains transformer, and can supply up to 100 mA on each rail. More than adequate for most CD player
analog stage or line stage. |
You have the option of fixed 5V or 15V rails (+ and -), and also a variable mode, where you can adjust the output voltage from 0 to 15V (+ and -). So with this unit you have all the power supply you ever need for your critical high end audio circuit.
The noise performance is close to the thoretical minimum noise, of a semiconductor reference.
Thanks to double preregulation of the reference current source, and potential free rectification, the ripple rejection is emmense. The residual 100Hz noise is well below the noise floor of the thermal noise. So that tiny hum you always hear in the back of your MC stage or RIAA amplifier, can be gone with this power supply.
New 2018 version with reinforced safety, isolation voltage of 4.250 Volts.
|NewClassD | Lars Clausen Technologies IVS | DK7500 Holstebro | Denmark | tel +45 31627823 | E-Mail: email@example.com |6306|