Stil spørgsmål, deltag i debatten, vis dit grej frem: Gå ind på vores
|1||Neutron Star Clock incl. Cables 22.579200 MHz |
(Obsolete, see Neutron Star 2)
|1||Neutron Star Clock incl. Cables 100.000000 MHz Femto sec. clock |
(Obsolete, see Neutron Star 2)
|1||Neutron Star Clock incl. Cables 18.432000 MHz |
(Obsolete, see Neutron Star 2)
|1||Low Noise Audio Power Supply 115/230V +/- 0 - 15V 100mA|
|1||Discrete OPAMP 8 pin DIP Single|
|1||NewClassD NCDV Singularity 2 High Grade Discrete 700W in 4 Ohms Class D Module Upgrade / exchange of from previous NCDV modules|
|1||NCDV Singularity High Grade Action Pack Stereo, 2 channels, 1 power supply module 39.000uF/80V, softstart and more|
|1||DX7905 -5V Negative UWB regulator|
|1||DX7909 -9V Negative UWB regulator|
|1||DX7924 -24V Negative UWB regulator|
Vi modtager gerne betaling med
Ultra Wide Bandwidth Regulators.
[Vi beklager den manglende oversættelse...]
|UWB Voltage Regulators|
Hvis du opretter dig [klik], kan du skrive din egen kommentar her..
|Afprøv modulerne i dit eget system i 30 dage. Fuld Pengene-Tilbage garanti...|
Hi People from Dexa technologies....what are you doing,you totaly crazy!!!!Your regulators have made my hiend cd player truly STATE OF THE ART player.Im totaly blown away.Oh Man why I have not choose and buy your regulators before I try many other low noise and shunt regulators on the market.Only I can say is,that you have made a verry verry faboulos job,to make this regulators and give to the other poeple.For me this are the best regs ot there and are supreme to the other I have try.Your regs transfered my cd player and dac to the ultimate level in sound and transparency.The sound is so more natural,real and plesant.The whole spectrum of the sound is more transparent,newer agresiv and much more analogue like.Im totaly in love with your regs.The next step is to buy your discrete opamap-s.Thanks for superb regs,I now believe that there out are still company-s thet realy know waht they doing,and the Dexa technologies is one of the TOP!
I upgraded my Musical Fidelity Digilog with these modules and I must say this was an amasing upgrade the bass is much more and the treble more distingt it is as if my dac got an anabolic injection this regulators have its given place in all in my equipment.
I upgraded my Benchmark Dac1 with these modules as the last upgrade in a series of many, including a D-Clock.
I did not expect much, because i implemented heavy filtering with OScon capacitors. But stil... There is nothing to be mistaken. It is a wonderful upgrade! Highly recomended. Especially the bass is faster and more powerfull, and the treble more distingt.
Upgraded my dac with these modules. I will do this with all my future diy components.
The sound prior to this upgrade was a bit stressed. Currently in use in my head-fi rig (PC with wasapi mode out | Matrix Mini I with these regulators | DIY balanced silver cable | Audio-gd C2c head-amp | Beyerdynamic T1 headphones.
'almost a year have passed since i've installed one of these great regulators in the DAC PSU rail of my Cambridge Audio Azur 840C player.
Great upgrade, which is well worth every penny of it's price.
Thank's NewClassd :)
Attila - HU
The UWB Regulator is a high end replacement for 78XX and 79XX regulators found in CD / DVD players and other audio equipment. For example 7805, but also other voltages are produced in UWB. (Even special ones upon request).
The output of the 7805 regulator is often used as reference for the DAC, or other noise sensitive sections of the audio equipment, like the OPAmps. Unfortunately the 7805 has relatively poor noise performance. Especially if there are external noise sources around the 7805 regulator, like ripple or load fluctuations. In case a fluctuating load is connected to the 7805, or 100 Hz ripple is present on the input of the 7805, the S/N ratio of the 7805 drops down below acceptable level for Audio purposes. In this case you can greatly benefit from a regulator with a good ripple rejection, but even more importantly, a regulator with a wide bandwidth loop, that can remain stable under fluctuating loads.
This simple and inexpensive upgrade gives a clear audible improvement.
The UWB regulator replaces the 7805 (or other 78XX / 79XX regulator) as a cheap and simple upgrade of your Audio Player, and has more than 100 times better ripple rejection, 10 times lower noise, and no line and load regulation error. It is discretely made on a circuit board, of roughly the same size as the 78XX / 79XX regulator. This way a regulator can be constructed with better performance than any known IC regulator on the market.
78XX is the positive voltage regulator, while ..
79XX is the negative voltage regulator. Be sure to get the right one.
Installation is very simple:
Remove the 78XX regulator.
Mount the UWB regulator in it's place.
If the 78XX regulator was mounted on a heat sink, you should also mount the UWB regulator on the same heat sink. If no heat sink is used in the player, you also don't have to use one with the UWB regulator.
Important! Use the isolator pad (supplied) when mounting the UWB on a heat sink.
No considerations are necessary with regards to the input / output capacitors on the regulator. The UWB regulator does not need any capacitors neither on input nor on the output. But it will tolerate any notrmal size cap on both inputs and outputs.
Why should you replace the 7805? Well because of the improved performance of the UWB regulator, and the improvement in sound quality you can gain, at a relatively low cost.
The tests were performed with a 7805 in a typical setup with 100uF low Z on the input, and 22uF + 100nF MKT on the output (mounted directly on the TO220 package). The UWB had no capacitors at all.
Test: Noise rejection, 12VDC + 1 Vrms 100 Hz ripple.
A lab supply was used to feed both regulators, a 100 Hz ripple signal was induced on the input via RC network. Amplitude of 1Vrms.
Test: SMPS Noise rejection.
Typical application environment in a DVD player with a switched mode power supply. A commercial soap bar SMPS 12V 1A was used to feed both regulators, and the output looked like this:
As can be seen the residual output noise of the UWB regulator is several times lower. Note at higher frequencies the noise floor of the 7805 is actually lower than the UWB regulator. This is because in certain bands the capacitors 'eat' the noise coming out of the 7805, by clamping it to GND. Unfortunately you can never 'eat' the lower frequency bands, no matter how big capacitor you were to use.
Test: 10kHz Sine Wave load.
A lab supply was used to feed both regulators, and the output was loaded with 10kHz 50 mA fluctuating load:
As you can see the UWB regulator has a much better damping of the fluctuating load of the output. This is a realistic load in a DAC / CD player application. The residual noise can lower the performance of the DAC, and thus the audio quality suffers.
Test: 1kHz Square Wave Load. (Wideband Load Noise)
A lab supply was used to feed both regulators, and the output was loaded with 1kHz 50 mA Squarewave fluctuating load. Typical of use in digital and analog circuits:
Again the UWB regulator has a much better damping of the fluctuating load of the output.
The power transistor is located on the rear side, allowing for the regulator to be effectively cooled.
Output Voltages: 3.3, 5, 8, 9, 12, 15V DC.
Input Voltage: Max: 25V DC.
Dropout Voltage: 2.00V (Equivalent to 78XX series).
Maximum Current DX78xx: 630mA.
Maximum Current DX79xx: 400mA.
Ripple Rejection: >100dB.
Line Rejection: unmeasurable.
Load Regulation: < 5mV 0-max load.
|NewClassD | Lars Clausen Technologies IVS | 7500 Holstebro | Danmark | tel 31627823 | E-Mail adresser: firstname.lastname@example.org|444|